The Prospective Formula 48 Class divider

ahayesf48.jpg (43628 bytes)
Alan Hayes Formula 48
(Photo courtesy of Alan Hayes)

divider

Class Secretary

To be determined

Provisional Point of Contact
Dick Lemke
Email Dick.Lemke/co.dakota.mn.us

divider
Categories within this documentLinks
Description 
AMYA Class RulesThe AMYA Class Page

General Multihull Page

Formula 48 Class Site

divider

Description

The FORMULA 48 CLASS: 1/10 scale (approximately) Formula 48 size which works out to be about 48 inches long and wide. Along with some very limited basic rules, the FORMULA 48 Class multihulls are considered as a development class - but without limitations, where individual design and technical ideas may be pursued. If you wish to experiment with hull AND rig and sail design, only three dimensions control this class, Maximum Length, Width and Sail Area. Solid wing sails, multiple masts, uni-rig sail design, Wing Masts all are legal and encouraged.

divider

FORMULA 48 MULTIHULL CLASS ASSOCIATION RULES

See the Formula 48 Website